sanders guide tools 101 ryobi tools,tips always sand with the grain only use a belt sander for stripping or reshaping use pencil marks to make sure you don't over-sand don't skip grits, especially .5 common floor sanding mistakes & how to avoid them ,as we see some floor sanding mistakes over and over again, we're sharing our tips and tricks to not only make your life easier but you really want to keep sanding until all marks and any shadows are completely removed. leave a reply cancel reply i rented an orbital sander and yesterday we spent all day sanding..how to remove all sanding marks on tabletop,i sanded the top & thought i had sanded out all the sanding marks which paper leaving deep scars relative to the scratches that the 220 is making. i think you'll find that the ros (random orbit sander) typically is the ideal .random orbital sander leaves marks. my older ro sander ,also make sure you work your way up to about 320. 80 grit will leave swirls no matter what. you have to then use 120 grit to smooth out the swirls..
our plan worked like a charm, but dang, that orbital edger is a backbreaker. this sander will leave swirl marks if you don't keep it moving.
they are commonly used for trimming to a scribed line (photo), sanding very also, unlike orbital and vibrating sanders, the sanding action is linear, grits coarser than 50 leave deep scratches that are difficult to remove.
this will leave you with swirl marks and other problems. 2 you screened too fast. sanding, buffing, and screening is not a race. going too fast will not allow the
sanding wood floors & refinishing yourself will definitely save money, and even an walls, but you'll also need a small orbital hand sander to do around the edges. attachements with soft bristles, hard plasic can leave lines across the floor.
35 votes, 50 comments. i got my 80 year old, uneven floors professionally finished because i was afraid i would screw-up and leave orbital marks on
but i still get swirl marks using pneumatic (dynabrade) random-orbit sanders. to use because it's so heavy, and leaves marks on the wood as it drags across.
if you are just going to get one, i would get the orbital sander. you will take off the mill marks however the sander will leave scratches all over
if you pick the wrong sequence for your sander, you won't achieve a smooth transition between one grit and another. your big machine will leave a grit line
if you're like me and you don't really enjoy the sanding process, let me show you how to flatten the board using 80 grit sandpaper and a random orbital sander. sanders definitely saves time, but they can also leave curly marks in the wood.
258 votes, 45 comments. 2.4m members in the howto community. welcome to r/howto! where you can learn how to do anything and everything yourself!
asked differently, is a belt sander just too much (unmanageable, takes too much too quickly, not random but leaves linear streaks, ..) to be used
none of it is rocket science, but it will help you to read through all the sanding pages, the edger can sand out drum marks that you might leave during the transition at the a palm or orbital sander is more powerful than your hand and will so
it will be a real challenge to remove those scratches with a random orbit sander even if you start with 80g. you would also have cross grain
this week, i focused on removing swirl marks and other sanding imperfections. during th i used a combination of hard scrubbing with 40-grit paper followed by 40-grit on the orbital sander. if so, please leave a comment.
compared to sanding across the grain by hand or with a belt sander, they leave less obvious cross-grain marks, which means that it's harder to
this completely random motion is what allows the sander to be able to leave a smooth finish without the sanding marks that palm sanders or
perfectly finishing a hardwood floor without any swirl marks is a challenge. leaving grit from previous cuts or any other dirt on the floor when you consider using an orbital sander attached to a vacuum for your final prep.
you've likely heard the terms belt, disk, in-line and orbital but do you know what but in the right hands and with fine sandpaper grits, belt sanders can leave a
the resulting scratches, which are shallower still,should leave a surface then move it in a circular or orbital fashion along the wall, as much as may leave swirl marks, which can be eliminated by hand-sanding or scraping.
a drum that runs at different speeds during the sanding process will leave a. no, an orbital machine will not cut through heavy finish or level a floor, this is the
sanding against the grain inevitably leaves scratches that defeats the identify the direction of the wood grain by examining the wood and looking for the lines. sand the wood one more time if you used an orbital or rotary sanding tool,
it can take a long time, and the results are subtle: sanding wood does not transform your i highly recommend the random-orbit sander, if you don't already own one. wood quickly and evenly, and it does so without leaving surface marks.
they work where a belt sander won't, but straight orbital sanders leave swirl marks because of their consistent motion. you can only vary a regular orbital sander's
a random orbit sander just might be the most user-friendly power tool. this combined movement leaves a random pattern of scratches running in the best way to ensure that your wood won't be marred by stray swirl marks.
swirl marks on a wood floor are a common problem that often occurs as the result of leaving the sander in one spot while it is running can cause gouges and
600 to 800 grit gives a good matte finish without leaving visible swirl marks. for the deep scratches you might want to start at 120 even. i think i